您好,欢迎来到杭州益清过滤材料有限公司网站!

专业专注,精益求精,服务客户

滤布的专业选择

15867135608(朱经理) 18857166317(张经理)
您现在的位置: 网站首页 > 新闻动态

新闻动态 / ALL PRODUCTS

全国热线15867135608

板框压滤机滤布安装注意事项

发布时间:2018-07-25 16:10作者:杭州益清过滤材料有限公司

1、滤布四周滤板压合接触的部分应确保平整,不能产生皱纹,避免被滤板挤压滤布造成损坏或泥浆泄漏。
 
1, filter cloth around the filter plate pressing contact parts should ensure smooth, can not produce wrinkles, avoid filter plate extrusion filter cloth damage or mud leakage.
 
 
 
2、避免扣环尾巴过长可能伸入滤板压合的部分而损坏滤布,或造成泥浆泄漏,应剪掉短尾巴。
 
2, avoid the long tail of the retaining ring, which may extend into the pressing part of the filter plate and damage the filter cloth, or cause mud leakage.
 
 
 
3、安装时候,需注意滤布与滤板之间没有异物或较大的污泥颗粒,较大的污泥颗粒或异物可能会在合板时,造成滤板或滤布损坏。
 
3, when installation, it is necessary to pay attention to the absence of foreign objects or larger sludge particles between filter cloth and filter plate. The larger sludge particles or foreign bodies may be damaged in the plate or filter cloth when the plate is plywood.
 
 
 
4、滤布安装时要注意正反面(对泥浆面与非对泥浆面),一般没有特殊要求情况下,滤布的布面(轧光面)对泥浆。否则安装错误会照成滤布容易堵塞,过滤效率低。
 
4. When the filter cloth is installed, pay attention to the positive and negative sides (for the mud surface and the non mud surface). Generally, there is no special requirement for the filter cloth. Otherwise, the installation error will be filtered into filter cloth easily clogged, low filtration efficiency.
 
 
5、不可用扣环把滤布锁的太紧,否则残余在滤板压合接触部位滤布内的污泥将不能被自动清洗除去。
 
5, do not use buckles to lock filter cloth too tightly. Otherwise, the sludge remaining in filter cloth at the contact position and filter cloth will not be removed automatically.
 
 
 
6、备用滤布应贮存于阴凉干燥的地方,建议采用暗色遮阳布予以保护,避免紫外线的照射,防止滤布材质的老化。
 
6. The reserve filter cloth should be stored in the cool and dry place, and it is suggested that the dark shade cloth should be used to protect it, avoid the ultraviolet radiation and prevent the aging of the material of the filter cloth.
 
 
 
7、安装滤布之前,需要先安装支撑滤布,其作用是在排泥时,将滤布被滤饼因重力作用向下迅速脱离而可能摩擦滤板表面凸点的磨损性降低程度,以保护过滤滤布,延长过滤滤布的使用寿命,并增进过滤效果。
 
7. Before installing the filter cloth, it is necessary to install the supporting filter cloth first. The function of the filter cloth is to remove the filter cake rapidly downward because of the gravity action in the sludge discharge. It may friction the wear resistance of the convex point on the surface of the filter plate, in order to protect filter cloth, prolong the service life of filter filter cloth and improve the filtering effect.

上一篇:板框滤布发往甘肃某洗煤厂 下一篇:污水处理带式压滤机滤布的作用
  • 公司简介
    杭州益清过滤材料有限公司是一家专业生产销售滤网、滤带与滤布的新型公司。主要产品有:带式压滤机滤带、聚酯污泥脱水网、螺旋干网、聚酯输送带、真空带式过滤机滤布、带式脱水机滤布、板框滤布、压滤机滤布、过滤袋。....
  • 产品类别
  • 联系我们
    地 址:杭州市余杭经济开发区五洲路一号路6号
    手 机:15867135608
    电 话:0571-56597394
    传 真: 0571-86967849