您好,欢迎来到杭州益清过滤材料有限公司网站!

专业专注,精益求精,服务客户

滤布的专业选择

15867135608(朱经理) 18857166317(张经理)
您现在的位置: 网站首页 > 新闻动态 > 技术文库

技术文库 / ALL PRODUCTS

全国热线15867135608

板框压滤机过滤时,滤板之间有喷料现象怎么处理

发布时间:2018-02-06 09:12作者:杭州益清过滤材料有限公司

1、可能是进料压力过高造成喷料,许多用户在进料管路上不安装压力表,导致进料压力失控,最终引起喷料。
1, it is possible that the injection pressure is too high, and many users do not install pressure gauge on the feeding line, which causes the feed pressure to get out of control and eventually lead to the spout.
2、将滤板压紧的顶紧力不够,进料压力升高后,滤板之间的作用力将滤板撑开造成喷料。
2, the pressing force of the filter plate is not enough and the pressure of the feed is raised. The force between the filter plates will pull the filter plate open to the spray.
3、滤板密封面有滤饼等杂物附着在表面上,滤板压紧后始终有较大缝隙存在,所以在卸除滤饼后密封面应清洗干净。
3, filter plate sealing surface has filter cake and other debris on the surface. After filter plate pressing, there are always larger gaps. Therefore, after removing the filter cake, the sealing surface should be cleaned.
4、滤板密封面已经有贯通沟槽或滤板本身已损坏。
4. The sealing surface of the filter plate has been broken through the groove or the filter plate itself has been damaged.

上一篇:压滤机安全技术操作规程 下一篇:压滤机生产过程中的泄漏分析
  • 公司简介
    杭州益清过滤材料有限公司是一家专业生产销售滤网、滤带与滤布的新型公司。主要产品有:带式压滤机滤带、聚酯污泥脱水网、螺旋干网、聚酯输送带、真空带式过滤机滤布、带式脱水机滤布、板框滤布、压滤机滤布、过滤袋。....
  • 产品类别
  • 联系我们
    地 址:杭州市余杭经济开发区五洲路一号路6号
    手 机:15867135608
    电 话:0571-56597394
    传 真: 0571-86967849
    邮 箱: clover317@163.com